Want A Deeper Dive Into The STROPPi?
From setup to stropping, we’ve got the deep dive know-how you need. Enjoy step-by-step instructions, smart shaving tips, answers to common questions, and deep-dive articles that help you get the most out of every shave with the STROPPi.
When you remove the STROPPi from its packaging, it will have a soft feel to it. Before using it, you will need to fully rinse the bar for a few seconds and allow it to air-dry completely to activate its natural cling. Once dry, press the bar firmly onto a smooth, non-porous surface in your shower such as tile, smooth stone, plastic, composite, or glass. Choose a spot close to where you regularly shave and out of direct water spray: chest height works well for face shaving.
Is your bar not sticking? Try mounting it to a glass panel, mirror, or even a handheld tile. Avoid textured surfaces like wood or stone, as they can prevent proper adhesion. Make sure the surface you choose is fully clean and dry before mounting.
Still having trouble? Check out our troubleshooting guide here.
For the smoothest shave, start with heat and hydration. Let warm water soak into your skin for a few minutes—especially when shaving coarse facial hair. This softens hair and opens pores, helping your razor glide more easily and reducing irritation. Before stropping, run warm water over your razor head. The heat improves blade performance and helps it pick up lubricant from the STROPPi more evenly. A well-hydrated shave is a smoother, more comfortable one.
The longer the stubble, the more important the pre-wash. A quick rinse with warm water helps remove excess oil and softens coarse hair, making for a smoother, cleaner shave.
Want to level up your shave prep? Check out our full guide here.
Now it’s time to activate the STROPPi’s surface. Lightly wet the bar's surface. Do not soak the bar. Too much water can soften the bar, threatening its mount. Once wet, lubricate your razor by running your razor's head down the bar several times using gentle pressure. As you strop, you’ll see a gel-like coating build up on and between the blades. This is the STROPPi forming a protective barrier between blade and skin. Note: Never strop the bar in your hand; only when properly mounted.
For best results when stropping, use a multi-blade razor (three blades or more). Multi-blade razors distribute pressure more evenly across the bar’s surface as you strop, reducing wear on the bar and improving the consistency of your lubrication.
For more information on picking the best razor or refining how you strop, check out our full article here.
With your razor coated and skin prepped, begin shaving using short, controlled strokes. Allow the razor to glide lightly. Do not apply too much pressure. After a few passes, re-strop your razor. Between passes, rinse your razor often, maintaining a proper glide for longer hair or tricky curves like your chin and upper lip. When you're finished, leave the bar mounted in place (no need to remove it). Rinse your razor thoroughly and store it in a safe place.
Feeling tugging or skipping? Give the STROPPi a quick re-strop before your next pass. It works best with frequent use—especially on thicker or coarser areas. Keep both your skin and the bar wet to ensure your razor glides smoothly while stropping and shaving.
Want more tips? Read our full guide to shaving your face with the STROPPi here.
From getting your STROPPi mounted to troubleshooting unexpected problems, we're here to help. We've collected some of the most frequently asked questions below to get you shaving the right way in no time.
Will the STROPPi re-stick if I remove it?
Yes. The STROPPi is designed to be removed and re-stuck multiple times.
However, frequent repositioning can increase the risk of wear or damage over time. If you need to move it regularly—such as for daily use—we recommend mounting it to a handheld tile. This allows you to relocate it easily without repeatedly reapplying it to different surfaces. If traveling, stick the bar to a small card (like a credit card). This allows you to easy use and store the bar while on the go.
Can I use any razor with the STROPPi?
While most razors can technically be used with it, the STROPPi is specifically designed for cartridge-style razors with three or more blades.
We do not recommend using single-blade or double-blade safety razors. Multi-blade cartridges not only offer better safety during shaving but also apply more even pressure to both the bar and your blades as you strop, ensuring a smoother strop and a more consistent lubrication.
Can I use the STROPPi for shaping my beard or neckline?
Yes, you can! The STROPPi is especially well-suited for smooth shaves and trimming thinner facial hair with precision. Its clear formula lets you see exactly where you’re shaving, making it ideal for shaping beards or defining necklines without any guesswork.
Just keep in mind that when working with thicker or longer hair, you’ll need to strop the bar more frequently to maintain a smooth glide and avoid tugging. For the best experience, soak your hair and skin for 5 to 10 minutes beforehand to soften your hair and ensure a comfortable shave.
Where should I mount the STROPPi for best results?
For best results, we recommend mounting the STROPPi in an easy-to-reach area close to where you shave most often. If you shave facial hair, position the bar at head height to make re-stropping between passes simple and efficient. For shaving legs, underarms, or the bikini area, mount it lower for comfortable access, especially if you shave while seated.
For the most secure mounting and longest bar life, choose a smooth, uninterrupted, and non-porous surface such as large, polished tile, untextured plastic or composite, or smooth, preferably polished stone. Avoid textured, uneven, or porous areas, as they may compromise adhesion. Be sure the bar is completely dry before mounting and only moderately wetted during use; placing it in a spot with minimal direct shower spray helps prevent waterlogging, which can cause the bar to swell, soften, and become unstuck. By mounting the STROPPi close to your shaving area, on the right surface, and out of constant water flow, you’ll ensure a secure hold, extend the bar’s lifespan, and maintain peak stropping performance.
When have I used too much water?
Water is the key to a smooth shave with the STROPPi.
One of the main advantages of the STROPPi is the fact it can act as a protective shaving lubricant that will not wash away in water rich environments. This unlocks a shave in which you can enjoy softer skin with a smoother, safer glide. All the benefits of a dry shave in the more ideal environment of a wet shave.
While you can't have too much water on your skin, you can have too much water on the STROPPi. Excessive soaking or prolonged direct spray can water-log the bar, causing it to delaminate from its mounting surface. Over time, water-logging can also soften the surface too much, leading to increased wear during stropping. As with all things—balance is key.
If the bar feels overly soft, changes texture, or starts slipping from the wall, stop wetting it. Allow it to air dry fully before using again.
There’s hair or dirt on my STROPPi—how do I clean it?
To clean your STROPPi, follow the same process as in Step 1.
Begin by removing the bar from its mounted surface. Next, rinse the bar thoroughly, allowing it air dry completely. Once fully dry, clean the mounting surface before reapplying the bar. Do not attempt to re-stick the bar while it’s still wet—this will lead to improper mounting.
How long does the STROPPi last?
The STROPPi is built for durability and designed to stay with you through weeks of smooth, consistent shaves.
On average, it provides a minimum of 30 shaves or should last up to 12 weeks. Its lifespan may vary depending on several factors including water type, shaving frequency, stropping pressure, and how often the bar has been moved or remounted. In most cases, it can last longer than 30 shaves, but if you notice rapid wear or unexpected signs of aging, please reach out to us—we’re here to help.
For more details about the STROPPi, visit our comprehensive FAQ page by clicking the button below. This page addresses the most common questions we’ve gathered from customer testimonials and our own testing. If you don’t find your question listed, feel free to reach out to us directly through our contact page.
The Finishing Touch Your Shave Has Been Missing
Every smooth shave deserves an even smoother aftershave. Introducing the SOOTHi — a next-generation aftershave designed to hydrate, soothe, and restore your skin post-shave. Made with a glycerin-rich formula and a unique dual-layer design, it delivers deep moisture and a secure, no-slip grip for effortless glide and precision. Discover for yourself how the SOOTHi completes the perfect shave.
Want To Become A STROPPi Professional?
Explore our collection of in-depth articles on our Shaving Tips & Tricks page. Explore topics like shaving in the shower without a mirror, how to customize the STROPPi to your shaving needs, and the power of bio-safe ingredients.
Quick Start Guide
Shaving Tips & Tricks
Frequently Asked Questions
